Voltage sources U1(t) and U2(t) are unabled and disabled at the same time. When U1(t) and U2(t) are unabled at t=0 a current iL

engineering

Description

Voltage sources U1(t) and U2(t) are unabled and disabled at the same time. When U1(t) and U2(t) are unabled at t=0 a current iL passes through the Coil with inductance L=0.05 H, plunger is pulled towards inside the stator closing the switch A and causing the unit to be activated to start working by taking power from voltage E. Also voltage VC2 across the capacitor C2 is applied to the Voltage to Force Converter and a force of F(t)=500VC2 Newton is produced. The direction of the force F(t) depends on whether switch S1 is closed or S2 is closed as shown on the figure. System parameters are given below:


Related Questions in engineering category